first commit
This commit is contained in:
9
application/samples/peripheral/i2c/CMakeLists.txt
Executable file
9
application/samples/peripheral/i2c/CMakeLists.txt
Executable file
@ -0,0 +1,9 @@
|
||||
#===============================================================================
|
||||
# @brief cmake file
|
||||
# Copyright (c) HiSilicon (Shanghai) Technologies Co., Ltd. 2023-2023. All rights reserved.
|
||||
#===============================================================================
|
||||
if(DEFINED CONFIG_SAMPLE_SUPPORT_I2C_MASTER)
|
||||
set(SOURCES "${SOURCES}" "${CMAKE_CURRENT_SOURCE_DIR}/i2c_master_demo.c" PARENT_SCOPE)
|
||||
elseif(DEFINED CONFIG_SAMPLE_SUPPORT_I2C_SLAVE)
|
||||
set(SOURCES "${SOURCES}" "${CMAKE_CURRENT_SOURCE_DIR}/i2c_slave_demo.c" PARENT_SCOPE)
|
||||
endif()
|
||||
79
application/samples/peripheral/i2c/Kconfig
Executable file
79
application/samples/peripheral/i2c/Kconfig
Executable file
@ -0,0 +1,79 @@
|
||||
#===============================================================================
|
||||
# @brief Kconfig file.
|
||||
# Copyright (c) HiSilicon (Shanghai) Technologies Co., Ltd. 2023-2023. All rights reserved.
|
||||
#===============================================================================
|
||||
config SAMPLE_SUPPORT_I2C_MASTER
|
||||
bool
|
||||
prompt "Support I2C Master Sample."
|
||||
default n
|
||||
depends on SAMPLE_SUPPORT_I2C
|
||||
help
|
||||
This option means support I2C Master Sample.
|
||||
|
||||
config I2C_MASTER_BUS_ID
|
||||
int
|
||||
prompt "Choose I2C master bus id."
|
||||
depends on SAMPLE_SUPPORT_I2C_MASTER
|
||||
default 2
|
||||
|
||||
config I2C_SCL_MASTER_PIN
|
||||
int
|
||||
prompt "Choose I2C SCL master pin."
|
||||
depends on SAMPLE_SUPPORT_I2C_MASTER
|
||||
default 8
|
||||
|
||||
config I2C_SDA_MASTER_PIN
|
||||
int
|
||||
prompt "Choose I2C SDA master pin."
|
||||
depends on SAMPLE_SUPPORT_I2C_MASTER
|
||||
default 9
|
||||
|
||||
config I2C_MASTER_PIN_MODE
|
||||
int
|
||||
prompt "Choose I2C master pin mode."
|
||||
depends on SAMPLE_SUPPORT_I2C_MASTER
|
||||
default 3
|
||||
|
||||
config I2C_SLAVE_ADDR
|
||||
hex
|
||||
prompt "Choose I2C slave addr."
|
||||
depends on SAMPLE_SUPPORT_I2C_MASTER
|
||||
default 0x49
|
||||
|
||||
config SAMPLE_SUPPORT_I2C_SLAVE
|
||||
bool
|
||||
prompt "Support I2C Slave Sample."
|
||||
default n
|
||||
depends on SAMPLE_SUPPORT_I2C
|
||||
help
|
||||
This option means support I2C Slave Sample.
|
||||
|
||||
config I2C_SLAVE_BUS_ID
|
||||
int
|
||||
prompt "Choose I2C slave bus id."
|
||||
depends on SAMPLE_SUPPORT_I2C_SLAVE
|
||||
default 2
|
||||
|
||||
config I2C_SCL_SLAVE_PIN
|
||||
int
|
||||
prompt "Choose I2C SCL slave pin."
|
||||
depends on SAMPLE_SUPPORT_I2C_SLAVE
|
||||
default 8
|
||||
|
||||
config I2C_SDA_SLAVE_PIN
|
||||
int
|
||||
prompt "Choose I2C SDA slave pin."
|
||||
depends on SAMPLE_SUPPORT_I2C_SLAVE
|
||||
default 9
|
||||
|
||||
config I2C_SLAVE_PIN_MODE
|
||||
int
|
||||
prompt "Choose I2C slave pin mode."
|
||||
depends on SAMPLE_SUPPORT_I2C_SLAVE
|
||||
default 3
|
||||
|
||||
config I2C_TRANSFER_LEN
|
||||
int
|
||||
prompt "Choose I2C transfer length."
|
||||
depends on SAMPLE_SUPPORT_I2C
|
||||
default 8
|
||||
11
application/samples/peripheral/i2c/i2c.code-workspace
Executable file
11
application/samples/peripheral/i2c/i2c.code-workspace
Executable file
@ -0,0 +1,11 @@
|
||||
{
|
||||
"folders": [
|
||||
{
|
||||
"path": "../../../../"
|
||||
}
|
||||
],
|
||||
"settings": {
|
||||
"debug.onTaskErrors": "debugAnyway",
|
||||
"workspace.samplePath": "./samples/peripheral/i2c"
|
||||
}
|
||||
}
|
||||
104
application/samples/peripheral/i2c/i2c_master_demo.c
Executable file
104
application/samples/peripheral/i2c/i2c_master_demo.c
Executable file
@ -0,0 +1,104 @@
|
||||
/**
|
||||
* Copyright (c) HiSilicon (Shanghai) Technologies Co., Ltd. 2023-2023. All rights reserved.
|
||||
*
|
||||
* Description: I2C Sample Source. \n
|
||||
*
|
||||
* History: \n
|
||||
* 2023-05-25, Create file. \n
|
||||
*/
|
||||
#include "pinctrl.h"
|
||||
#include "i2c.h"
|
||||
#include "soc_osal.h"
|
||||
#include "app_init.h"
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
#include "dma.h"
|
||||
#endif
|
||||
|
||||
#define I2C_MASTER_ADDR 0x0
|
||||
#define I2C_SET_BAUDRATE 400000
|
||||
#define I2C_TASK_DURATION_MS 500
|
||||
#if defined(CONFIG_I2C_SUPPORT_INT) && (CONFIG_I2C_SUPPORT_INT == 1)
|
||||
#define I2C_INT_TRANSFER_DELAY_MS 800
|
||||
#endif
|
||||
|
||||
#define I2C_TASK_PRIO 24
|
||||
#define I2C_TASK_STACK_SIZE 0x1000
|
||||
|
||||
static void app_i2c_init_pin(void)
|
||||
{
|
||||
/* I2C pinmux. */
|
||||
uapi_pin_set_mode(CONFIG_I2C_SCL_MASTER_PIN, CONFIG_I2C_MASTER_PIN_MODE);
|
||||
uapi_pin_set_mode(CONFIG_I2C_SDA_MASTER_PIN, CONFIG_I2C_MASTER_PIN_MODE);
|
||||
}
|
||||
|
||||
static void *i2c_master_task(const char *arg)
|
||||
{
|
||||
unused(arg);
|
||||
i2c_data_t data = { 0 };
|
||||
|
||||
uint32_t baudrate = I2C_SET_BAUDRATE;
|
||||
uint8_t hscode = I2C_MASTER_ADDR;
|
||||
uint16_t dev_addr = CONFIG_I2C_SLAVE_ADDR;
|
||||
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
uapi_dma_init();
|
||||
uapi_dma_open();
|
||||
#endif /* CONFIG_I2C_SUPPORT_DMA */
|
||||
|
||||
/* I2C master init config. */
|
||||
app_i2c_init_pin();
|
||||
uapi_i2c_master_init(CONFIG_I2C_MASTER_BUS_ID, baudrate, hscode);
|
||||
|
||||
#if defined(CONFIG_I2C_SUPPORT_INT) && (CONFIG_I2C_SUPPORT_INT == 1)
|
||||
uapi_i2c_set_irq_mode(CONFIG_I2C_MASTER_BUS_ID, 1);
|
||||
#endif /* CONFIG_I2C_SUPPORT_INT */
|
||||
|
||||
/* I2C data config. */
|
||||
uint8_t tx_buff[CONFIG_I2C_TRANSFER_LEN] = { 0 };
|
||||
for (uint32_t loop = 0; loop < CONFIG_I2C_TRANSFER_LEN; loop++) {
|
||||
tx_buff[loop] = (loop & 0xFF);
|
||||
}
|
||||
|
||||
uint8_t rx_buff[CONFIG_I2C_TRANSFER_LEN] = { 0 };
|
||||
data.send_buf = tx_buff;
|
||||
data.send_len = CONFIG_I2C_TRANSFER_LEN;
|
||||
data.receive_buf = rx_buff;
|
||||
data.receive_len = CONFIG_I2C_TRANSFER_LEN;
|
||||
|
||||
while (1) {
|
||||
osal_msleep(I2C_TASK_DURATION_MS);
|
||||
osal_printk("i2c%d master send start!\r\n", CONFIG_I2C_MASTER_BUS_ID);
|
||||
if (uapi_i2c_master_write(CONFIG_I2C_MASTER_BUS_ID, dev_addr, &data) == ERRCODE_SUCC) {
|
||||
osal_printk("i2c%d master send succ!\r\n", CONFIG_I2C_MASTER_BUS_ID);
|
||||
} else {
|
||||
continue;
|
||||
}
|
||||
#if defined(CONFIG_I2C_SUPPORT_INT) && (CONFIG_I2C_SUPPORT_INT == 1)
|
||||
osal_msleep(I2C_INT_TRANSFER_DELAY_MS);
|
||||
#endif
|
||||
osal_printk("i2c%d master receive start!\r\n", CONFIG_I2C_MASTER_BUS_ID);
|
||||
if (uapi_i2c_master_read(CONFIG_I2C_MASTER_BUS_ID, dev_addr, &data) == ERRCODE_SUCC) {
|
||||
for (uint32_t i = 0; i < data.receive_len; i++) {
|
||||
osal_printk("i2c%d master receive data is %x\r\n", CONFIG_I2C_MASTER_BUS_ID, data.receive_buf[i]);
|
||||
}
|
||||
osal_printk("i2c%d master receive succ!\r\n", CONFIG_I2C_MASTER_BUS_ID);
|
||||
}
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static void i2c_master_entry(void)
|
||||
{
|
||||
osal_task *task_handle = NULL;
|
||||
osal_kthread_lock();
|
||||
task_handle = osal_kthread_create((osal_kthread_handler)i2c_master_task, 0, "I2cMasterTask", I2C_TASK_STACK_SIZE);
|
||||
if (task_handle != NULL) {
|
||||
osal_kthread_set_priority(task_handle, I2C_TASK_PRIO);
|
||||
osal_kfree(task_handle);
|
||||
}
|
||||
osal_kthread_unlock();
|
||||
}
|
||||
|
||||
/* Run the i2c_master_entry. */
|
||||
app_run(i2c_master_entry);
|
||||
101
application/samples/peripheral/i2c/i2c_slave_demo.c
Executable file
101
application/samples/peripheral/i2c/i2c_slave_demo.c
Executable file
@ -0,0 +1,101 @@
|
||||
/**
|
||||
* Copyright (c) HiSilicon (Shanghai) Technologies Co., Ltd. 2023-2023. All rights reserved.
|
||||
*
|
||||
* Description: I2C Sample Source. \n
|
||||
*
|
||||
* History: \n
|
||||
* 2023-05-25, Create file. \n
|
||||
*/
|
||||
#include "pinctrl.h"
|
||||
#include "i2c.h"
|
||||
#include "soc_osal.h"
|
||||
#include "app_init.h"
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
#include "dma.h"
|
||||
#endif
|
||||
|
||||
#define I2C_SLAVE_ADDR 0x8
|
||||
#define I2C_SET_BAUDRATE 500000
|
||||
#define I2C_TASK_DURATION_MS 100
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
#define I2C_DMA_TRANSFER_DELAY_MS 500
|
||||
#endif
|
||||
|
||||
#define I2C_TASK_PRIO 24
|
||||
#define I2C_TASK_STACK_SIZE 0x1000
|
||||
|
||||
static void app_i2c_init_pin(void)
|
||||
{
|
||||
/* I2C pinmux. */
|
||||
uapi_pin_set_mode(CONFIG_I2C_SCL_SLAVE_PIN, CONFIG_I2C_SLAVE_PIN_MODE);
|
||||
uapi_pin_set_mode(CONFIG_I2C_SDA_SLAVE_PIN, CONFIG_I2C_SLAVE_PIN_MODE);
|
||||
}
|
||||
|
||||
void *i2c_slave_task(const char *arg)
|
||||
{
|
||||
unused(arg);
|
||||
i2c_data_t data = { 0 };
|
||||
|
||||
uint32_t baudrate = I2C_SET_BAUDRATE;
|
||||
uint16_t dev_addr = I2C_SLAVE_ADDR;
|
||||
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
uapi_dma_init();
|
||||
uapi_dma_open();
|
||||
#endif /* CONFIG_I2C_SUPPORT_DMA */
|
||||
|
||||
/* I2C slave init config. */
|
||||
app_i2c_init_pin();
|
||||
uapi_i2c_slave_init(CONFIG_I2C_SLAVE_BUS_ID, baudrate, dev_addr);
|
||||
|
||||
#if defined(CONFIG_I2C_SUPPORT_INT) && (CONFIG_I2C_SUPPORT_INT == 1)
|
||||
uapi_i2c_set_irq_mode(CONFIG_I2C_SLAVE_BUS_ID, 1);
|
||||
#endif /* CONFIG_I2C_SUPPORT_INT */
|
||||
|
||||
/* I2C data config. */
|
||||
uint8_t tx_buff[CONFIG_I2C_TRANSFER_LEN] = { 0 };
|
||||
for (uint32_t loop = 0; loop < CONFIG_I2C_TRANSFER_LEN; loop++) {
|
||||
tx_buff[loop] = (loop & 0xFF);
|
||||
}
|
||||
|
||||
uint8_t rx_buff[CONFIG_I2C_TRANSFER_LEN] = { 0 };
|
||||
data.send_buf = tx_buff;
|
||||
data.send_len = CONFIG_I2C_TRANSFER_LEN;
|
||||
data.receive_buf = rx_buff;
|
||||
data.receive_len = CONFIG_I2C_TRANSFER_LEN;
|
||||
|
||||
while (1) {
|
||||
osal_msleep(I2C_TASK_DURATION_MS);
|
||||
osal_printk("i2c%d slave receive start!\r\n", CONFIG_I2C_SLAVE_BUS_ID);
|
||||
if (uapi_i2c_slave_read(CONFIG_I2C_SLAVE_BUS_ID, &data) == ERRCODE_SUCC) {
|
||||
for (uint32_t i = 0; i < data.receive_len; i++) {
|
||||
osal_printk("i2c slave receive data is %x\r\n", data.receive_buf[i]);
|
||||
}
|
||||
osal_printk("i2c%d slave receive succ!\r\n", CONFIG_I2C_SLAVE_BUS_ID);
|
||||
}
|
||||
osal_printk("i2c%d slave send start!\r\n", CONFIG_I2C_SLAVE_BUS_ID);
|
||||
#if defined(CONFIG_I2C_SUPPORT_DMA) && (CONFIG_I2C_SUPPORT_DMA == 1)
|
||||
osal_msleep(I2C_DMA_TRANSFER_DELAY_MS);
|
||||
#endif
|
||||
if (uapi_i2c_slave_write(CONFIG_I2C_SLAVE_BUS_ID, &data) == ERRCODE_SUCC) {
|
||||
osal_printk("i2c%d slave send succ!\r\n", CONFIG_I2C_SLAVE_BUS_ID);
|
||||
}
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static void i2c_slave_entry(void)
|
||||
{
|
||||
osal_task *task_handle = NULL;
|
||||
osal_kthread_lock();
|
||||
task_handle = osal_kthread_create((osal_kthread_handler)i2c_slave_task, 0, "I2cSlaveTask", I2C_TASK_STACK_SIZE);
|
||||
if (task_handle != NULL) {
|
||||
osal_kthread_set_priority(task_handle, I2C_TASK_PRIO);
|
||||
osal_kfree(task_handle);
|
||||
}
|
||||
osal_kthread_unlock();
|
||||
}
|
||||
|
||||
/* Run the i2c_slave_entry. */
|
||||
app_run(i2c_slave_entry);
|
||||
Reference in New Issue
Block a user