初始提交
This commit is contained in:
46
build/config/target_config/ws63/patch_config/acore.cfg
Executable file
46
build/config/target_config/ws63/patch_config/acore.cfg
Executable file
@ -0,0 +1,46 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址; 如果是短跳转, 必须 1K 对齐; 如果是长跳转, 必须 2K 对齐;
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
####end platform patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
lm_ble_adv_set_rpa_sed lm_ble_adv_set_rpa_sed_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
|
||||
####start bth patch
|
||||
####end bth patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-app-iot.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-app-iot.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-app.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-app.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
51
build/config/target_config/ws63/patch_config/ws63-liteos-btc-only-asic.cfg
Executable file
51
build/config/target_config/ws63/patch_config/ws63-liteos-btc-only-asic.cfg
Executable file
@ -0,0 +1,51 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
####start wifi patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
dm_ble_generate_access_address dm_ble_generate_access_address_patch
|
||||
lm_ble_scan_recv_extended_adv lm_ble_scan_recv_extended_adv_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
####end btc patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-hilink.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-hilink.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-mfg.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-mfg.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-perf.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-perf.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-testsuite-radar.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-testsuite-radar.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
39
build/config/target_config/ws63/patch_config/ws63-liteos-testsuite.cfg
Executable file
39
build/config/target_config/ws63/patch_config/ws63-liteos-testsuite.cfg
Executable file
@ -0,0 +1,39 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
Patch_TBL_Address = 0x00000400
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
#max 192 patches
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start btc patch
|
||||
####end btc patch
|
||||
|
||||
####start bth patch
|
||||
####end bth patch
|
||||
84
build/config/target_config/ws63/patch_config/ws63-liteos-xts.cfg
Executable file
84
build/config/target_config/ws63/patch_config/ws63-liteos-xts.cfg
Executable file
@ -0,0 +1,84 @@
|
||||
[Patch Info]
|
||||
Device_Code_Version = Version1
|
||||
|
||||
Patch_Cpu_Core = APPLICATION
|
||||
|
||||
Patch_File_Address = 0x00000000
|
||||
|
||||
# patch_remap table 在bin文件中的偏移地址
|
||||
Patch_TBL_Address = 0x00000400
|
||||
|
||||
# patch_remap table 实际的运行地址, 必须 1K 对齐
|
||||
Patch_TBL_Run_Address = 0x0014c000
|
||||
|
||||
# 如果这里配置为 4, 那 remap table 里只能存短跳指令, Patch_TBL_Run_Address 和 patch 函数地址间隔不能超过 1M
|
||||
# 如果这里配置为 8, 1. init 时需要将 off_region 配置为 true; 2. 对 patch 函数地址则没有限制;
|
||||
Table_Max_Size = 8
|
||||
Table_Reg_Size = 8
|
||||
|
||||
# patch 数量 = 指令 patch 的数量(192) + 数据 patch 的数量(2)
|
||||
# 注意: drivers\chips\ws63\arch\riscv\riscv31\flash_patch.h 中的 RISCV31_PATCH_CMP_REG_NUM 宏单指 指令 patch 的数量
|
||||
# main.c 中的 PATCH_NUM 宏指 指令 patch + 数据 patch 的数量
|
||||
TABLE_REG_CONUT = 194
|
||||
|
||||
[ROM Info]
|
||||
ROM_Address = 0x00109000
|
||||
ROM_Size = 0x00043000
|
||||
|
||||
[Output Info]
|
||||
CMP_Bin_File = cmp.bin
|
||||
TBL_Bin_File = tbl.bin
|
||||
RW_Bin_File = patch.bin
|
||||
|
||||
[Function]
|
||||
####start platform patch
|
||||
uapi_watchdog_enable uapi_watchdog_enable_patch
|
||||
uapi_watchdog_kick uapi_watchdog_kick_patch
|
||||
hal_sfc_v150_reg_write hal_sfc_v150_reg_write_patch
|
||||
hal_sfc_v150_get_flash_id hal_sfc_v150_get_flash_id_patch
|
||||
uapi_sfc_reg_read uapi_sfc_reg_read_patch
|
||||
uapi_sfc_dma_read uapi_sfc_dma_read_patch
|
||||
do_greedy_erase do_greedy_erase_patch
|
||||
uapi_sfc_reg_write uapi_sfc_reg_write_patch
|
||||
####end platform patch
|
||||
|
||||
####start wifi patch
|
||||
dmac_psm_process_tim_elm dmac_psm_process_tim_elm_patch
|
||||
dmac_psm_tx_complete_sta dmac_psm_tx_complete_sta_patch
|
||||
dmac_psm_max_powersave_enable dmac_psm_max_powersave_enable_patch
|
||||
dmac_scan_channel_statistics_complete_continue dmac_scan_channel_statistics_complete_continue_patch
|
||||
dmac_get_data_type_from_8023_etc dmac_get_data_type_from_8023_etc_patch
|
||||
dmac_rx_prepare_data dmac_rx_prepare_data_patch
|
||||
frw_thread_process_msg frw_thread_process_msg_patch
|
||||
dmac_mac_error_handle dmac_mac_error_handle_patch
|
||||
dmac_mac_error_process_event dmac_mac_error_process_event_patch
|
||||
hh503_dispatch_trig_event_encap hh503_dispatch_trig_event_encap_patch
|
||||
hh503_rx_alloc_netbuf_and_dscr hh503_rx_alloc_netbuf_and_dscr_patch
|
||||
hal_rx_add_dscr hal_rx_add_dscr_patch
|
||||
hal_rx_pre_add_dscr hal_rx_pre_add_dscr_patch
|
||||
hal_get_tx_q_status_empty hal_get_tx_q_status_empty_patch
|
||||
dmac_latency_trace_init_proc dmac_latency_trace_init_proc_patch
|
||||
dmac_latency_stats_init_proc dmac_latency_stats_init_proc_patch
|
||||
hal_gp_get_mpdu_count hal_gp_get_mpdu_count_patch
|
||||
hal_get_tx_dscr_pn_msb hal_get_tx_dscr_pn_msb_patch
|
||||
dmac_tx_complete_ampdu_buffer dmac_tx_complete_ampdu_buffer_patch
|
||||
dmac_mgmt_switch_channel dmac_mgmt_switch_channel_patch
|
||||
hal_set_mac_clken hal_set_mac_clken_patch
|
||||
hh503_clear_rx_pn hh503_clear_rx_pn_patch
|
||||
hh503_enable_ce hh503_enable_ce_patch
|
||||
dmac_tx_get_txop_alg dmac_tx_get_txop_alg_patch
|
||||
dmac_tx_get_baw_remain_num dmac_tx_get_baw_remain_num_patch
|
||||
alg_tpc_tx_query_vap_special alg_tpc_tx_query_vap_special_patch
|
||||
dmac_config_tx_addba_rsp_lut_proc dmac_config_tx_addba_rsp_lut_proc_patch
|
||||
alg_ar_get_phy_protocol_by_rate_info alg_ar_get_phy_protocol_by_rate_info_patch
|
||||
frw_free_msg_node frw_free_msg_node_patch
|
||||
hh503_pow_set_user_resp_frm_phy_tx_mode hh503_pow_set_user_resp_frm_phy_tx_mode_patch
|
||||
hal_device_handle_idle_vap_down hal_device_handle_idle_vap_down_patch
|
||||
hal_recover_machw_phy_and_pa hal_recover_machw_phy_and_pa_patch
|
||||
####end wifi patch
|
||||
|
||||
####start btc patch
|
||||
evt_task_ble_acl_refresh_next_peripheral_time evt_task_ble_acl_refresh_next_peripheral_time_patch
|
||||
evt_task_ble_adv_set_intv evt_task_ble_adv_set_intv_patch
|
||||
evt_task_ble_acl_process_rx_content_isr evt_task_ble_acl_process_rx_content_isr_patch
|
||||
####end btc patch
|
||||
Reference in New Issue
Block a user