添加本地ble控制的支持, 但是存在不能控制色温和亮度

application/samples/wifi/ohos_connect/hilink_adapt/entry/hilink_ble_main.c

@@ -1,6 +1,13 @@
 /*
  * Copyright (c) Huawei Technologies Co., Ltd. 2020-2022. All rights reserved.
  * Description: 蓝牙SDK提供demo示例代码（此文件为DEMO，需集成方适配修改）
+ * 
+ * BLE本地控制功能增强:
+ * - 增加完整的智能照明设备控制功能
+ * - 支持亮度、色温、场景模式、渐变时长、色温模式控制
+ * - 复用hilink_device.c中的fast_report统一上报机制
+ * - 根据连接模式（BLE/云端）自动选择上报方式(BLE_SendCustomData/HILINK_ReportCharState)
+ * - 确保BLE和云端控制逻辑的完全一致性
  */
 #include <stdio.h>
 #include <unistd.h>
@@ -39,8 +46,28 @@
 #define CHECKSUM_REPORT "{\"data\":{\"checkSum\":\"%s\"},\"sid\":\"checkSum\"}"
 #endif
 
+// 外部设备控制函数声明 - 引用device_module.c中的实际设备控制逻辑
+extern int myhandle_put_brightness(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_put_cct(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_put_lightMode(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_put_switch(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_put_progressSwitch(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_put_colourMode(const char* svc_id, const char* payload, unsigned int len);
+extern int myhandle_get_brightness(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+extern int myhandle_get_cct(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+extern int myhandle_get_lightMode(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+extern int myhandle_get_switch(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+extern int myhandle_get_progressSwitch(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+extern int myhandle_get_colourMode(const char* svc_id, const char* in, unsigned int in_len, char** out, unsigned int* out_len);
+
+// 引用统一的上报机制
+extern int fast_report(const char* svc_id);
+extern void set_connection_mode(connection_mode_t mode);
+extern connection_mode_t get_connection_mode(void);
+
+
 //static bool g_switch = 0;
-int sid_switch;
+// int sid_switch;  // 注释掉，现在使用实际设备控制函数
 static bool g_autoUpdate = 0;
 static int ble_adv_time = 0;
 static HILINK_BT_DevInfo g_btDevInfo = {0};
@@ -210,18 +237,11 @@ int getDeviceVersion(char* *firmwareVer, char* *softwareVer, char* *hardwareVer)
 
 //#if (HILINK_NETCFG_MODE != SOFTAP_MODE)
 
-static void ReporSwitchStatus(void)
+// static void ReporSwitchStatus(void)
-{
+// {
-    char buff[128] = { 0 };
+//     set_connection_mode(CONN_MODE_BLE);  // 设置为BLE模式
-    int ret = snprintf_s(buff, sizeof(buff), sizeof(buff) - 1, SWITCH_REPORT, sid_switch);
+//     fast_report("switch");
-    if (ret <= 0) {
+// }
-        HILINK_SAL_NOTICE("ReporSwitchStatus snprintf_s ret:%d\r\n", ret);
-        return;
-    }
-    unsigned int buffLen = strlen(buff);
-    ret = BLE_SendCustomData(CUSTOM_SEC_DATA, (const unsigned char *)buff, buffLen);
-    HILINK_SAL_NOTICE("BLE_SendCustomData:%s len:%u,ret:%d\r\n", buff, buffLen, ret);
-}
 
 static void ReporAutoUpdateStatus(void)
 {
@@ -295,8 +315,27 @@ static BLE_InitPara g_bleInitParam = {
 static int BleHandleCustomDataGet(const char *sid)
 {
     HILINK_SAL_NOTICE("get %s svc\r\n", sid);
+    
+    // 设置为BLE模式并使用统一的fast_report机制
+    set_connection_mode(CONN_MODE_BLE);
+    
     if (strcmp(sid, "switch") == 0) {
-        ReporSwitchStatus();
+        fast_report("switch");
+        return 0;
+    } else if (strcmp(sid, "brightness") == 0) {
+        fast_report("brightness");
+        return 0;
+    } else if (strcmp(sid, "cct") == 0) {
+        fast_report("cct");
+        return 0;
+    } else if (strcmp(sid, "lightMode") == 0) {
+        fast_report("lightMode");
+        return 0;
+    } else if (strcmp(sid, "progressSwitch") == 0) {
+        fast_report("progressSwitch");
+        return 0;
+    } else if (strcmp(sid, "colourMode") == 0) {
+        fast_report("colourMode");
         return 0;
     } else if (strcmp(sid, "update") == 0) {
         ReporAutoUpdateStatus();
@@ -311,23 +350,48 @@ static int BleHandleCustomDataGet(const char *sid)
 }
 
 // 参考链接 https://device.harmonyos.com/cn/docs/devicepartner/DevicePartner-Guides/device-development-ble-specifications-control-0000001482432154
+// 添加全量状态上报接口，供外部调用
+void BLE_ReportAllDeviceStatus(void)
+{
+    if (ble_sdk_running) {
+        // 设置为BLE模式
+        set_connection_mode(CONN_MODE_BLE);
+        
+        // 使用统一的fast_report机制上报所有服务状态
+        fast_report("switch");
+        fast_report("brightness");
+        fast_report("cct");
+        fast_report("lightMode");
+        fast_report("progressSwitch");
+        fast_report("colourMode");
+        
+        HILINK_SAL_NOTICE("BLE reported all device status using fast_report\r\n");
+    }
+}
+
 static int BleHandleCustomData(const char *buff, unsigned int len)
 {
     if (strcmp((char *)buff, "{}") == 0) {
         /* 上报全量数据 */
-        ReporSwitchStatus();
+        set_connection_mode(CONN_MODE_BLE);  // 设置为BLE模式
+        fast_report("switch");
+        fast_report("brightness");
+        fast_report("cct");
+        fast_report("lightMode");
+        fast_report("progressSwitch");
+        fast_report("colourMode");
 #ifdef CONFIG_SUPPORT_HILINK_INDIE_UPGRADE
         ReporFwvCheckSum();
 #endif
         return 0;
     }
     int ret = -1;
-
+    
     cJSON *json = cJSON_Parse(buff);
     if (json == NULL) {
         return ret;
     }
-
+    set_connection_mode(CONN_MODE_BLE);  // 设置为BLE模式
     do {
         cJSON *sidItem = cJSON_GetObjectItem(json, "sid");
         cJSON *dataItem = cJSON_GetObjectItem(json, "data");
@@ -340,10 +404,15 @@ static int BleHandleCustomData(const char *buff, unsigned int len)
             break;
         }
 
-        if (strcmp(sidItem->valuestring, "allservices") == 0) {
+        if (strcmp(sidItem->valuestring, "allservices") == 0 || strcmp(sidItem->valuestring, "getStateinfo") == 0) {
             /* H5 连接上时会给设备发送allservices， 设备需要给H5同步全量状态 */
             HILINK_SAL_NOTICE("sync dev status\r\n");
-            ReporSwitchStatus();
+            fast_report("switch");
+            fast_report("brightness");
+            fast_report("cct");
+            fast_report("lightMode");
+            fast_report("progressSwitch");
+            fast_report("colourMode");
 #ifdef CONFIG_SUPPORT_HILINK_INDIE_UPGRADE
             ReporFwvCheckSum();
 #endif
@@ -358,15 +427,76 @@ static int BleHandleCustomData(const char *buff, unsigned int len)
             ret = 0;
             break;
         } else if (strcmp(sidItem->valuestring, "switch") == 0) {
-            cJSON *item = cJSON_GetObjectItem(dataItem, "on");
+            // 使用实际的设备控制函数
-            if (item == NULL) {
+            char *data_str = cJSON_Print(dataItem);
-                HILINK_SAL_NOTICE("on json null\r\n");
+            if (data_str != NULL) {
-                break;
+                ret = myhandle_put_switch("switch", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("switch"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
+            }
+            break;
+        } else if (strcmp(sidItem->valuestring, "brightness") == 0) {
+            // 亮度控制
+            char *data_str = cJSON_Print(dataItem);
+            if (data_str != NULL) {
+                ret = myhandle_put_brightness("brightness", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("brightness"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
+            }
+            break;
+        } else if (strcmp(sidItem->valuestring, "cct") == 0) {
+            // 色温控制
+            char *data_str = cJSON_Print(dataItem);
+            if (data_str != NULL) {
+                ret = myhandle_put_cct("cct", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("cct"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
+            }
+            break;
+        } else if (strcmp(sidItem->valuestring, "lightMode") == 0) {
+            // 场景模式控制
+            char *data_str = cJSON_Print(dataItem);
+            if (data_str != NULL) {
+                ret = myhandle_put_lightMode("lightMode", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("lightMode"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
+            }
+            break;
+        } else if (strcmp(sidItem->valuestring, "progressSwitch") == 0) {
+            // 渐变时长控制
+            char *data_str = cJSON_Print(dataItem);
+            if (data_str != NULL) {
+                ret = myhandle_put_progressSwitch("progressSwitch", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("progressSwitch"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
+            }
+            break;
+        } else if (strcmp(sidItem->valuestring, "colourMode") == 0) {
+            // 色温模式控制
+            char *data_str = cJSON_Print(dataItem);
+            if (data_str != NULL) {
+                ret = myhandle_put_colourMode("colourMode", data_str, strlen(data_str));
+                if (ret == 0) {
+                    fast_report("colourMode"); // 控制成功后上报状态
+                }
+                ret = 0;
+                free(data_str);
             }
-            sid_switch = item->valueint;
-            HILINK_Printf("DEMO: Hilink receive a switch cmd, on = %d\r\n", sid_switch);
-            ReporSwitchStatus(); // 连上手机蓝牙时，发的第一个cjson数据。同步一次设备状态
-            ret = 0;
             break;
         } else if (strcmp(sidItem->valuestring, "update") == 0) {
             cJSON *item = cJSON_GetObjectItem(dataItem, "autoUpdateOn");
@@ -395,11 +525,11 @@ static int BleRcvCustomData(unsigned char *buff, unsigned int len)
         HILINK_SAL_NOTICE("buff is NULL\r\n");
         return -1;
     }
-    HILINK_SAL_NOTICE("custom data, len: %u, data: %s", len, buff);
+    HILINK_SAL_NOTICE("custom data, len: %u, data: %s\n", len, buff);
 
     /* 处理自定义数据 */
     if (BleHandleCustomData((const char *)buff, len) != 0) {
-        HILINK_SAL_NOTICE("BleHandleCustomData fail");
+        HILINK_SAL_NOTICE("BleHandleCustomData fail\n");
         return -1;
     }
 

application/samples/wifi/ohos_connect/hilink_adapt/product/device_profile.h

@@ -30,7 +30,7 @@ extern "C" {
 
 #define DEVICE_HIVERSION "1.0.0"
 /* 设备固件版本号 */
-#define FIRMWARE_VER "1.0.6"
+#define FIRMWARE_VER "1.0.7"
 /* 设备硬件版本号 */
 #define HARDWARE_VER "1.0.0"
 /* 设备软件版本号 */

application/samples/wifi/ohos_connect/hilink_adapt/product/hilink_device.c

@@ -409,6 +409,24 @@ int handle_get_cmd(const char* svc_id, const char* in, unsigned int in_len, char
 	 return function(svc_id, in, in_len, out,out_len);
 }
 
+// 全局连接模式变量
+static connection_mode_t g_connection_mode = CONN_MODE_CLOUD;
+
+// 设置连接模式的接口
+void set_connection_mode(connection_mode_t mode)
+{
+    if( mode != g_connection_mode) {
+        g_connection_mode = mode;
+        HILINK_Printf("Connection mode changed to: %s\r\n", (mode == CONN_MODE_BLE) ? "BLE" : "CLOUD");
+    }
+}
+
+// 获取当前连接模式
+connection_mode_t get_connection_mode(void)
+{
+    return g_connection_mode;
+}
+
 // 快速上报函数，用于上报服务状态信息
 int fast_report(const char* svc_id)
 {
@@ -416,11 +434,31 @@ int fast_report(const char* svc_id)
 	 int len;
 	 int err = handle_get_cmd(svc_id, NULL, 0, &payload, (unsigned int *)&len);
 	 if(err != 0) {
-	 HILINK_Printf("get msg from %s failed \r\n", svc_id);
+        HILINK_Printf("get msg from %s failed \r\n", svc_id);
-	 return err;
+        return err;
+	 }
+	 
+	 // 根据当前连接模式选择上报方式
+	 if (g_connection_mode == CONN_MODE_BLE) {
+	     // BLE模式：使用BLE_SendCustomData
+	     char buff[256] = {0};
+	     int ret = snprintf_s(buff, sizeof(buff), sizeof(buff) - 1, "{\"data\":%s,\"sid\":\"%s\"}", payload, svc_id);
+	     if (ret > 0) {
+	         err = BLE_SendCustomData(CUSTOM_SEC_DATA, (const unsigned char *)buff, strlen(buff)); // 0x03 = CUSTOM_SEC_DATA
+	         HILINK_Printf("BLE report %s result is %d, data:[%s] \r\n", svc_id, err, buff);
+	     } else {
+	         err = -1;
+	         HILINK_Printf("BLE report %s snprintf failed\r\n", svc_id);
+	     }
+	 } else {
+	     // 云端模式：使用HILINK_ReportCharState
+	     err = HILINK_ReportCharState(svc_id, payload, len);
+	     HILINK_Printf("CLOUD report %s result is %d, payload:%s \r\n", svc_id, err, payload);
+	 }
+	 
+	 if (payload) {
+	     free(payload);
 	 }
-	 err = HILINK_ReportCharState(svc_id, payload, len);
-	 HILINK_Printf("report %s result is %d, payload:%s \r\n", svc_id, err, payload);
 	 return err;
 } 
 /*
@@ -446,6 +484,9 @@ int HILINK_PutCharState(const char *svcId, const char *payload, unsigned int len
     }
     cJSON_Delete(json);
     
+    // 设置为云端连接模式
+    set_connection_mode(CONN_MODE_CLOUD);
+    
     int err = handle_put_cmd(svcId, payload, len);
     e_printf("[HILINK_PutCharState] 控制指令处理完成，返回值: %d\r\n", err);
     return err;
@@ -510,6 +551,10 @@ int HILINK_GetCharState(const char *svcId, const char *in, unsigned int inLen, c
 	{
         return -1;
     }
+    
+    // 设置为云端连接模式
+    set_connection_mode(CONN_MODE_CLOUD);
+    
 	#ifdef CONFIG_SUPPORT_HILINK_INDIE_UPGRADE
     if (strcmp(svcId, "checkSum") == 0) {
         return GetFwvCheckSum(out, outLen);

application/samples/wifi/ohos_connect/hilink_adapt/product/hilink_device.h

@@ -186,6 +186,19 @@ void HILINK_NotifyDevStatus(int status);
  */
 int HILINK_ProcessBeforeRestart(int flag);
 
+// 连接模式枚举定义
+typedef enum {
+    CONN_MODE_CLOUD = 0,    // 云端连接模式
+    CONN_MODE_BLE = 1       // BLE本地连接模式
+} connection_mode_t;
+
+// 连接模式管理接口
+void set_connection_mode(connection_mode_t mode);
+connection_mode_t get_connection_mode(void);
+
+// 快速上报接口
+int fast_report(const char* svc_id);
+
 #ifdef __cplusplus
 #if __cplusplus
 }